Product
Oil and Gas separation filter element 1614642300
Oil and Gas separation filter element 1614642300
Oil and Gas separation filter element 1614642300
Oil and Gas separation filter element 1614642300
Oil and Gas separation filter element 1614642300
Oil and Gas separation filter element 1614642300

Oil and Gas separation filter element 1614642300

Atlas Oil and gas separation filter element 1614642300 (2906009800) adopts the more advanced anti-corrosion and efficient microfiber condensed material as the main filter, air compressor series filter element makes the output air of the compressor more than 3μm solid particles can all be filtered out

  • Operating temperature -30℃ ~ +110℃

Product introduction

Atlas Oil and gas separation filter element 1614642300 (2906009800)using the more advanced anti-corrosion efficient microfiber condensed material as the filter body, air compressor series filter element makes the output air of the compressor more than 3μm solid particles can be all filtered out, And the very tiny about 0.01-1μm of oil-water-air dissolution through the filter element is condensed into larger oil droplets, accumulated at the bottom of the filter element, and then through the bottom of the filter element concave return pipe siphon back to the lubrication system so that the compressor discharge more pure, oil-free compressed air.

Technical parameter

1. Filtration accuracy is 0.1&μm

2. Oil content of compressed air can reach below 3ppm

3. Filtration efficiency is 99.999%

4. The service life can reach 3000-6000h

5. Initial pressure difference: ≤0.02MPa

6. The filter material is made of imported composite fiber

Working principle

The oil and gas separator adopts the most advanced anticorrosive and efficient microfiber condensed material as the main filtration body. The filter bed of the filter element of the system is composed of the pre-filtration layer, microfiber layer, support layer, filtration layer and gravity settling layer

Matters needing attention

1. In the process of using the oil and gas separator, the normal pressure difference of the newly installed oil and gas separator is between 0.17 and 0.3bar, and it is abnormal if it exceeds 0.3bar.

2. In the process of using oil and gas separator, when the pressure difference is greater than 0.8bar, it is abnormal. At this time, it is necessary to check the air compressor air system, check whether the air filter can filter 5-6um magazines to reach 95% or more, and reach 99.8% of impurities in 7-10um. Otherwise, the oil and gas separator core will have a pressure difference of more than 0.8bar in advance in use.

If the core pressure difference of the oil and gas separator is greater than 1bar during use, replace the core of the oil and gas separator.

Product details


Oil and Gas separation filter element 1614642300

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • Air compressor oil filter element 16218755000

    Air compressor oil filter element 16218755000

  • 1613692100 Air Filter

    1613692100 Air Filter

  • 3222188141 Air filter element

    3222188141 Air filter element

  • Oil Filter 1202804000

    Oil Filter 1202804000

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us