Oil and Gas separation filter element 1613984000

Product introduction

Atlas oil and gas separation filter element 1613984000 (2901085800) adopts the more advanced anti-corrosion and efficient microfiber condensed material as the filter body, air compressor series filter element makes the output air of the compressor more than 3μm solid particles can be all filtered out, And the very tiny about 0.01-1μm of oil-water-air dissolution through the filter element is condensed into larger oil droplets, accumulated at the bottom of the filter element, and then through the bottom of the filter element concave return pipe siphon back to the lubrication system so that the compressor discharge more pure, oil-free compressed air.

Technical parameter

1. Filtration accuracy is 0.1&μm

2. Oil content of compressed air can reach below 3ppm

3. Filtration efficiency is 99.999%

4. The service life can reach 3000-6000h

5. Initial pressure difference: ≤0.02MPa

6. The filter material is made of imported composite fiber

Performance characteristics

Atlas oil and gas separation core is a flange hole group positioning installation oil and gas separation core, oil and gas separation element is the key component that determines the quality of compressed air in the air compressor. The compressed air from the air compressor entrails large and small oil droplets. Large oil droplets are easy to separate through the oil and gas separator, while small oil droplets (suspended oil particles) must be filtered through the micron grade glass fiber filter layer of the oil and gas separator.

Filter element - Crack resistance verification according to ISO 2941

Filter element - Structural integrity according to ISO 2942

Filter element - Material and liquid communication compatibility verification according to ISO 2943

Filter element - end load test method according to ISO3723

Filter element - Filter element fatigue characteristics are determined according to ISO3724

Filter element - differential pressure flow characteristics were determined according to ISO3968

Filter element -- Multiple pass method for determining filtration characteristics is ISO4572

Product details