Product
Oil and gas separation filter element 1613730600
Oil and gas separation filter element 1613730600
Oil and gas separation filter element 1613730600
Oil and gas separation filter element 1613730600
Oil and gas separation filter element 1613730600
Oil and gas separation filter element 1613730600

Oil and gas separation filter element 1613730600

Atlas oil and gas separation filter 1613730600 adopts the more advanced anti-corrosion efficient microfiber condensate material as the main filter, air compressor series filter element makes the output air of the compressor more than 3μm solid particles can all be filtered out,

  • Operating temperature -30℃ ~ +110℃

Product details

Atlas oil and gas separation filter 1613730600 adopts the more advanced anti-corrosion efficient microfiber condensate material as the main filter, air compressor series filter element makes the output air of the compressor more than 3μm solid particles can all be filtered out, and the very small about 0.01-1μm oil water air dissolution through the filter element is condensed into a larger oil droplets, Accumulates at the bottom of the filter element, and then siphon back to the lubrication system through the return pipe at the bottom of the concave of the filter element, so that the compressor can discharge more pure, oil-free compressed air.

Technical parameter

1. Filtration accuracy is 0.1&μm

2. Oil content of compressed air can reach below 3ppm

3. Filtration efficiency is 99.999%

4. The service life can reach 3000-6000h

5. Initial pressure difference: ≤0.02MPa

6. The filter material is made of imported composite fiber

Working principle

The oil and gas separator adopts the most advanced anticorrosive and efficient microfiber condensed material as the main filtration body. The filter bed of the filter element of the system is composed of the pre-filtration layer, microfiber layer, support layer, filtration layer and gravity settling layer

Q&A

1. When the final pressure difference is reached, the filter element of the oil and gas separator must be replaced. Attention must be paid to the installation or replacement of the filter element to ensure that the conditions are not wrong. If the seal is rotated correctly (with anti-static measures) to discharge the remaining oil from the return oil management, the return pipe must have sufficient length to reach the bottom end cap, etc.

2. When installing and replacing the filter element of screw air compressor, the most important thing is to ensure that the lubricating oil in the separation tank and the dry side of the oil filter element are clean, and the surface of the filter element separation layer is easy to operate, so that the amount of oil carried is increased, the efficiency is reduced, and the dry side of the filter element contains impurities and plugs the return oil pipeline, resulting in the phenomenon of gas with oil.

Product details以上翻译结果来自有道神经网络翻译(YNMT)· 通用领域


Oil and gas separation filter element 1613730600

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • Air compressor oil filter element 16218755000

    Air compressor oil filter element 16218755000

  • 1613692100 Air Filter

    1613692100 Air Filter

  • 3222188141 Air filter element

    3222188141 Air filter element

  • Oil Filter 1202804000

    Oil Filter 1202804000

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us