Product
1030107000 air compressor filter element
1030107000 air compressor filter element
1030107000 air compressor filter element
1030107000 air compressor filter element
1030107000 air compressor filter element
1030107000 air compressor filter element

1030107000 air compressor filter element

1030107000 Atlas air compressor filter element adopts the more advanced anti-corrosion efficient microfiber condensed material as the main filter, so that the output air of the compressor 3μm above the solid particles can all be filtered out

  • Nominal pressure 0.6Mpa

Product introduction

1030107000 Atlas air compressor filter element adopts the more advanced anti-corrosion efficient microfiber condensed material as the main filter, so that the output air of the compressor 3μm above the solid particles can all be filtered out, and the very small about 0.01-1μm oil water gas dissolution through the filter element is condensed into a larger oil droplets, accumulated at the bottom of the filter element, Then siphon back to the lubrication system through the return pipe at the bottom of the hollow of the filter element so that the compressor can discharge more pure, oil-free compressed air.

Technical parameter

Accuracy of technical parameters: 0.1&μm

Filtration efficiency: 99.99%

Initial pressure difference: ≤0.02Mpa

Service life: 3500-5200h

Oil content: 3-6PPm

Performance characteristics

1. Atlas oil and gas separation core is a flange hole group positioning installation oil and gas separation core

2. Oil and gas separation element is the key component that determines the compressed air quality of air compressor

3. The compressed air from the air compressor entrails large and small oil droplets. Large oil droplets are easy to separate through the oil and gas separator, while small oil droplets (suspended oil particles) must be filtered through the micron-grade glass fiber filter material layer of the oil and gas separator.

common problem

1. When the final pressure difference is reached, the filter element of the oil and gas separator must be replaced. Attention must be paid to the installation or replacement of the filter element to ensure that the conditions are not wrong. If the seal is rotated correctly (with anti-static measures) to discharge the remaining oil from the return oil management, the return pipe must have sufficient length to reach the bottom end cap, etc.

2. When installing and replacing the filter element of screw air compressor, the most important thing is to ensure that the lubricating oil in the separation tank and the dry side of the oil filter element are clean, and the surface of the filter element separation layer is easy to operate, so that the amount of oil carried is increased, the efficiency is reduced, and the dry side of the filter element contains impurities and plugs the return oil pipeline, resulting in the phenomenon of gas with oil.

Product details


1030107000 air compressor filter element

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • 1030107000 Air filter - high quality filter element

    1030107000 Air filter - high quality filter element

  • 1030107000  air compressor filter element

    1030107000 air compressor filter element

  • 1030107000 Air filter premium element

    1030107000 Air filter premium element

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us