Product
1613900100HWS air filter
1613900100HWS air filter
1613900100HWS air filter
1613900100HWS air filter
1613900100HWS air filter
1613900100HWS air filter

1613900100HWS air filter

1613900100HWS air filter​ in order to reduce the friction resistance between the relative moving parts in the engine,

  • Nominal pressure 21MPa

Product introduction

1613900100HWS air filter in order to reduce the friction resistance between the relative moving parts in the engine, reduce the wear of parts, oil is constantly transported to the friction surface of each moving parts, forming a lubricating oil film for lubrication. The oil itself contains a certain amount of gum, impurities, moisture and additives. At the same time, in the process of engine work, metal debris into the air, the entry of debris, oil oxide production, so that the debris in the oil gradually increased. If the oil is not filtered and directly enters the lubricating oil road, it will bring the debris contained in the oil into the friction surface of the moving pair, accelerate the wear of parts and reduce the service life of the engine. The role of HWS Lifert oil filter is to filter out the debris, gum and moisture in the oil, to the lubrication parts of the delivery of clean oil.

Performance characteristics

It is used to filter impurities such as dust, sand, water and oil mist in the air source, ensure the cleanliness of the air source, improve the service life of oil and gas separation filter element, oil filter element and lubricating oil, and ensure the safe and efficient operation of the air compressor system. Xinxiang Lifelte Filter Co., Ltd. is a professional technical production enterprise, dedicated to the research and production of hydraulic and pneumatic system purification for many years, the production of 50273 air filter can be completely interchangeable original products, please feel free to purchase and use.

Matters needing attention

1. In the process of using the oil and gas separator, the normal pressure difference of the newly installed oil and gas separator is between 0.17 and 0.3bar, and it is abnormal if it exceeds 0.3bar.

2. In the process of using oil and gas separator, when the pressure difference is greater than 0.8bar, it is abnormal. At this time, it is necessary to check the air compressor air system, check whether the air filter can filter 5-6um magazines to reach 95% or more, and reach 99.8% of impurities in 7-10um. Otherwise, the oil and gas separator core will have a pressure difference of more than 0.8bar in advance in use.

If the core pressure difference of the oil and gas separator is greater than 1bar during use, replace the core of the oil and gas separator.

Product details


Similar ProductsVIEW MORE >

Online message

We will contact you within 24 hours

GET GUIDANCE
Copyright © Aite(Henan) environmental protection equipment Co.

icon_online

icon_email

Contact Us

icon_wehtapp Contact Us