Large bag filter

Product introduction

Aite environmental protection multi-bag filter is suitable for flow 60~5000M3/H working conditions, for a small number of filter bags, with the hand wheel and standard bearing boom, easy to open and operate; For filters larger than 12 bags, you can choose cylinder or hydraulic assistance, only one person to operate when opening and closing. Auxiliary devices include pressure relief valve, positioning pin, etc., effectively ensure the safe operation of the equipment.

Product characteristics

Large flow bag filter in the original multi-bag machine on the basis of the increase of fast switching mechanism and balancing mechanism, simple and rapid operation. Overcome the usual large flow bag filter bag change cumbersome, long time problems. The spring-assisted balancing mechanism makes the top cover stop at any Angle of 0-105 degrees, safe and reliable. Quick switching mechanism ensures the simplest, ease-of-use operating system, minimizes downtime, promotes productivity and reduces operating costs. The special pressure ring ensures the sealing of the filter bag. Unique balancing mechanism makes switching on and off the top cover a breeze. Compact design minimizes liquid loss.

1. the use of fast clamp lock switch, easy to operate, easy to use and safe, it will reduce the downtime to a minimum, thus reducing operating costs.

2. with chain design, exhaust pressure relief to open the filter

3. the unique three-jaw pressing cover can ensure good sealing between the filter and the filter bag, the filter bag side leakage probability is very small.

4. the spring gravity balancer replaces the conventional manual lifting arm, so that the operation of the top cover is as light as nothing, just by gently pushing or pulling the hand, you can open or put down the top cover.

5. side in side out liquid flow design, can ensure that the liquid is completely discharged, and tangent inlet and outlet also greatly reduce the height of operation.

6. filter design and compact volume, to minimize the loss of liquid.

7. vertically open the top cover, multiple sets can be compact parallel, save installation space and pipe distribution cost.

8. with special filter bag pressure ring fastening tool, easy to operate and labor saving.

9. 5 kinds of import and export azimuth layout optional, convenient design and installation.

10. according to the special requirements of customers, can be made with jacket.

Product use

Remove particulate impurities of various sizes, purify liquids, and protect critical equipment

1. Water treatment system

2. fixed bed and dynamic bed capture and filtration 3, condensate water recovery and filtration

3. oil recovery water injection filtration

4. Protection and filtration of heat exchange system

5. cooling water recovery

6. waste water reuse filtration

7. sand filter and other mechanical filter

8. activated carbon capture and filtration

9. automobile coating before processing

10. Automobile painting and mixing system

11. fine chemical filtration

12. Chemical packaging and filtration

13. syrup, edible oil filtration

Installation method

This product is generally divided into two mounting forms: flange connection and threaded connection.

1. Connect the inlet and outlet of the bag filter with the corresponding pipeline.

2. Close the exhaust valve installed on the top of the single-bag filter.

3. please check whether the connecting pipe is firm; Whether the working pressure is within the allowable range.

4. Open the input valve slowly to let the liquid flow into and fill the filter, prevent the liquid from suddenly impacting the filter bag and causing rupture, and then observe whether there is leakage. If no leakage occurs, start filtering. Note: Pay attention to the inlet and outlet directions during installation.

Product details