Product
Single-bag quick-open filter
Single-bag quick-open filter
Single-bag quick-open filter
Single-bag quick-open filter
Single-bag quick-open filter
Single-bag quick-open filter

Single-bag quick-open filter

The single-bag quick-opening filter is simple in structure and easy to install. It is composed of cylinder, filter bag and supporting net basket. The liquid flows into the filter bag from the upper inlet flange, and the solid impurity particles are intercepted on the filter screen when passing through the filter bag.

  • Designed flow rate: 5-40 cubic meters per hour
  • Design pressure: 12bar/ 160C

Product Overview

The single-bag quick-opening filter is simple in structure and easy to install. It is composed of cylinder, filter bag and supporting net basket. The liquid flows into the filter bag from the upper inlet flange, and the solid impurity particles are intercepted on the filter screen when passing through the filter bag. The supporting net is used to support the filter bag to prevent the water pressure from pressing the filter bag against the cylinder wall and affecting the filtration effect. Clean liquid flows out through the lower outlet flange. There is a pressure gauge at the top of the equipment. When the solid impurities deposit to a certain amount, it will hinder the flow of liquid and lead to the increase of pressure in the filter bag. When the pressure gauge shows a certain value, it will remind the staff to replace the filter bag. When replacing the filter bag, first open the pressure relief port, quickly remove the flange at the top and replace the filter bag. After the filter bag is replaced, the pressure gauge will return to the normal state again, and the equipment can operate normally.


Technical parameters

1, material: SUS304, SUS316L

2. Interface type: flange

3, sealing material: Ding Qing/silica gel/fluorine glue/EPDM sealing ring

4, sealing type: O type sealing ring

5, suitable for filter bag: 1 filter bag, 2 filter bag, 3 filter bag, 4 filter bag

6. Design pressure: 12bar/160 degrees Celsius

7, design flow: 5-40 cubic meters per hour

8. Surface treatment: sandblasting or polishing

9. The height of the installation foot can be adjusted

10, can be customized according to customer requirements



Product Features

1, the support basket hole rate is high, to ensure that the filtration system flow is large, small volume;

2, the support basket hole rate is high, but also improve the actual use of the filter bag area, prolong the service life;

3. The top-in design makes the replacement of the filter bag convenient and quick;

4. Top-in design, uniform distribution of streamline makes the impurities trapped in the filter bag medium evenly distributed;

5, high strength support net effectively support filter bag, prevent fiber migration, ensure high filtration efficiency;

6, high strength support net basket but also ensure the filter bag high mechanical strength;

7, the filter bag can be installed in the special magnetic filter or activated carbon, diatomaceous earth, to remove iron impurities or adsorption of organic matter;

8, the standard specifications of the support net is suitable for all the standard size of the filter bag, so that the filter bag is strong interchangeability;

9, closed filter system, strong security;


Product Features


Single-bag quick-open filter

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • Bag filter manufacturers

    Bag filter manufacturers

  • Multi-bag filter

    Multi-bag filter

  • Stainless steel bag filter filter accuracy 5 μm

    Stainless steel bag filter filter accuracy 5 μm

  • 304 stainless steel bag filter

    304 stainless steel bag filter

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us