PP bag filter is a kind of novel structure, small size, easy to operate flexible, energy saving, efficient, closed work, strong applicability of multi-purpose filtration equipment. Bag filter is a kind of pressure filter device, which is mainly composed of the filter cylinder, the filter cartridge cover and the quick-opening mechanism, PVC/PP filter bag reinforcing mesh and other main components. The filtrate is obtained by the filter shell (coarse filter) PP bag PVC/PP filter through the filter bag of the required fineness grade, and the impurity particles are intercepted by the filter bag. The machine is very convenient to replace the filter bag
(strong acid and alkali fine filter coarse filter large flow)PP bag filter is a kind of novel structure, small size, simple and flexible operation, energy saving, efficient, closed work, strong applicability of multi-purpose filtration equipment. Bag filter is a kind of pressure filter device, which is mainly composed of filter cylinder, filter cartridge cover and quick-opening mechanism, PVC/PP filter bag reinforcing mesh and other main components. The filtrate flows into the filter bag by the side inlet pipe of the filter shell, and the filter bag itself is installed in the reinforcing mesh basket. The liquid penetrates through the filter bag of the required fineness grade to obtain qualified filtrate. The impurity particles are intercepted by the filter bag. The machine is very convenient to replace the filter bag, filter basically no material consumption.
The machine is simple to operate, only need to install the filter bag with the required fineness grade in the filter cylinder, check whether the O-type sealing ring is intact, and then tighten the ring bolt of the filter cylinder cover, you can put into work.
After the pump starts, the pressure gauge on the filter rises slightly, and the initial pressure is about 0.05MPa. With the extension of the use time, the filter slag in the cylinder gradually increases. When the pressure reaches 0.3MPa, the cylinder cover should be shut down and opened to check the slag retention in the filter bag, and the filter bag can be replaced and continued to use (the filter bag can be reused by cleaning).
Generally, it is appropriate to adjust the pressure of the filter between 0.1-0.3MPa, which can be adjusted through the return pipe or the return valve on the pump. Too high filtration pressure will damage the filter bag
Paint, beer, vegetable oil, medicine, chemicals, petroleum products, textile chemicals, photosensitive chemicals, electroplating solution, milk, mineral water, hot solvent, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible oil, wax and other protective nets, need to pay special attention to.
Filter bag side leakage probability is small, effectively ensure the filtration quality.
Bag filter can bear greater working pressure, small pressure loss, low operating cost, energy saving effect is obvious.
The filtration accuracy of the filter bag has been improved, and has reached 0.5μm.
Bag filtration capacity is large, small volume, large pollution capacity.
Based on the working principle and structure of the bag filter system, the replacement of the filter bag is convenient and fast, and the filter is free from cleaning, saving labor and time.
Filter bag can be used repeatedly after cleaning, saving cost.
Bag filter has wide application range, flexible use and various installation methods.
https://www.aiteeps.com/bag-filter/index.htmlhttps://www.aiteeps.com/bag-filter/index.html
PP bag filter
Similar ProductsVIEW MORE >