LYC-C Box type mobile oil filter

Product introduction

The box type mobile oil filter LYC-C series is different from other LYC series oil filters. The oil filter has a metal shell package, which can prevent external environmental pollution and achieve better self-protection. Its internal system adopts high-precision oil filter truck LYC-B series filter system, which can achieve higher filtration accuracy. The shell of the oil filter adopts the quick-opening structure, which can be quickly and quickly opened without any tools to replace the filter element. A pressure gauge is installed on the panel to continuously indicate the operating condition of the system and the pollution degree of the filter element. The hydraulic oil filter comes with a fuel tank. The oil in the self-provided tank can be directly injected into the system after being filtered to the standard through self-circulation. Especially suitable for hydraulic system with servo valve, proportional relief valve and other precision components.

Structural characteristics

1. This machine adopts refined shell to cover all components to protect the equipment from external pollution.

2. It is especially suitable for the occasions with high requirements on the use environment.

3. This machine includes a special gear pump driven by a motor, with low noise, strong self-priming ability, smooth operation and so on.

4. High pressure pipeline is provided with overflow protection device, which can effectively protect the hydraulic system.

5. Adopt thermal relay protection to prevent motor damage caused by overload.

6. The crude filter at the suction port protects the oil pump and prolongs the service life of the main filter.

7. The pump is equipped with two stages of fine filter, so that the oil quickly reach a high cleanliness.

8 fine filter according to the different needs of users, select different precision, to achieve the required requirements.

9. The oil filter shell adopts the quick-opening structure, without any tools, it can be quickly and quickly open the cover and replace the filter element.

10. The pressure gauge is installed on the panel, which continuously indicates the operating condition of the system and the pollution degree of the filter element when working.

Technical parameter

Models: government's 32 c - - - * * / * * government - 50 c/government - 63 - c * * * / government - 100 - c * * * / * *

Rated flow L/min: 32 50 63 100

Rated pressure Mpa: 0.6

Initial pressure loss Mpa: ≤0.02

Coarse filtering accuracy μm: 100

Primary filtration accuracy μm: 10, 20, 40

Secondary filtration accuracy μm: 3, 5, 10, 20

Note: * is the precision of the two-stage fine filter, such as 003 for 3 microns

** is the applicable medium, omitted: general hydraulic oil

BH: Water, glycol

V: phosphate ester hydraulic fluid

*** Applicable medium viscosity ≤160cSt

Product characteristics