Due to the existence of water in the hydraulic lubrication system, the oil will be oxidized, the oil will deteriorate, the oil film thickness will be reduced, the lubrication will be reduced, the oil will be denatured and polymerized to form large molecules, the oil viscosity will be changed, the organic acid will be formed, and the metal surface will be corroded, and the dielectric strength of the oil will be reduced or lost.
Due to the existence of water in the hydraulic lubrication system, the oil will be oxidized, the oil will deteriorate, the oil film thickness will be reduced, the lubrication will be reduced, the oil will be denatured and polymerized to form large molecules, the oil viscosity will be changed, the organic acid will be formed, and the metal surface will be corroded, and the dielectric strength of the oil will be reduced or lost. For traditional filtration and separation equipment, it is particularly difficult to separate another liquid from another liquid mixed together. The coalescing and separatingoil filterdeveloped by Aite Environmental Protection can remove particles and impurities in the oil, emulsified water and free water, without damaging the quality of the original product.
Imported filter material is used to filter filter material, large filter area design, can filter very fine particles of impurities, so that oil products to achieve a high degree of cleanliness.
The coalescence system consists of a set of coalescence filter element, which adopts polar molecular structure. After passing through the filter element, the free water and emulsified water in the oil are coalesced into larger water droplets, which are then settled into the water storage under the action of gravity.
The separation filter element of the separation system is made of hydrophobic material. When the oil passes through the filter element, the water droplets are blocked on the outer surface of the filter element and coalesce with each other until they settle into the water storage tank due to the action of gravity.
The separated water is stored in the water storage tank. When the height of the interface reaches the set value, the valve is opened to discharge the water until it reaches the lower liquid level, and the valve is closed to stop the drainage.
Model: LYC-50J(According to the flow and customer requirements, different models of this series)
Flow rate: 50L/min
Pressure: 0.6Mpa
Filtration accuracy before pump: 100μm
Primary filtration accuracy: 10, 20, 40
Secondary filtration accuracy: ≥3μm
Motor power: 2.2KW
Filter medium: general hydraulic oil, turbine oil, transformer oil, etc. (Details of other oil can be called for consultation)
Hydraulic oil coalescing dehydrating filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
