The lubricating oil coalescing dehydration oil filter is to solve the problem of excessive water content in various oils. Using the "coalescence separation" dehydration technology, the HO series coalescing dehydration oil filter is developed.
The lubricating oil coalescing dehydration oil filter is to solve the problem of excessive water content in various oils. Using the "coalescence separation" dehydration technology, the HO series coalescing dehydration oil filter is developed.
The oil first filters out the particles in the oil from the primary filter, and then enters the coalescing separator. The oil passes through the four processes of filtration, coalescence, and sedimentation to realize the function of removing water and output purified oil. The water settled in the sump is drained through the drain valve on the sump. At the same time, according to the oil quality, the oil can be selected directly through the filter to filter out the particulate pollutants in the oil, and the purified oil can be output.
Model: LYC-J series
Rated flow: 25-400L/min
Operating temperature: 25-80°C
Recommended viscosity: 10-120Cst
Rated pressure: 0.6Mpa
Original pressure loss: ≤0.01Mpa
Coarse filtration precision: 100μm
Voltage: AC380V three-phase
Motor power: 0.75-13KW
1. It can break all the oil-water emulsification structure in the oil.
2. The free water in the oil is removed, and the water content after treatment is less than 100PPM.
3. The solid particles in the oil are filtered, and the cleanliness reaches NAS6 level or higher.
4. It has high filtration precision, large dirt holding capacity, long service life of filter element and high dehydration efficiency.
5. No heating, vacuuming and high-speed centrifugation, low energy consumption and low cost of use.
6. It will not change the physical and chemical properties of the oil and prolong the service life of the oil.
Lubricating oil coalescing dehydration oil filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
