SGF-H660-10C Duplex High Pressure Filter

Product introduction

SGF-H660-10C double-barrel high-pressure filter is installed on the high-pressure pipeline of the oil pump outlet to protect the control components and actuators, especially in the automatic control system, the high-precision servo components and plunger components can prevent pollution and avoid failure, prolong the service life of components.

SGF-H660-10C double-cylinder high-pressure filter is composed of two single-cylinder filters, bypass valve, reversing valve, etc., which enables the system to replace the filter element without stopping the system, and is suitable for continuous hydraulic systems.

Features

When the filter element of one of the filters is blocked until the pressure indication value of the differential pressure transmitter is 0.5MPa, the transmitter sends a signal, and the filter element should be replaced at this time. As long as the reversing valve is turned, the other spare filter will work immediately. At this time, only need to unscrew the screw plug to drain the oil, and then unscrew the casing to replace the blocked filter element. The filter cartridge on the filter element side needs to be replaced, allowing a small amount of internal leakage. If the filter element cannot be replaced in time for any reason, the pressure difference continues to rise to the bypass valve opening pressure of SGF double-cylinder high-pressure filter 0.6MPa, the bypass valve will automatically open to avoid re-contamination caused by the rupture of the filter element due to the continuous rise of pressure, but the user should Replace the filter element when the transmitter sends a message.

Application field

1. Metallurgy

2. Petrochemical

3. Textile

4. Electronics and Pharmaceuticals

5. Thermal power and nuclear power

6. Machining equipment

Product Details