Aite environmental protection self-cleaning dust filter cylinder

Product Introduction

    Aite environmental protection self-cleaning dust filter cylinder is a star-shaped filter cylinder made of a certain length of crisp filter material folded into a pleat and glued to the end. Filter cylinder without cage bone, easy to install.

    There are many varieties of filter cylinder, which are thin and long and thick and short. Long and thin filter cylinder (such as φ≤160, L=1 ~ 2m), the pleats (such as 45 pleats) between the gap is large, the Angle is large, the pleats are less and shallow, the filter area is 2 ~ 5 times larger than the filter bag with the same diameter and length, the cleaning is easy and the effect is good; It is suitable for dust filtration with concentration ≥15g/m, and the filtration speed is 0.6-1.2m /min. Coarse and short filter cylinder (such as φ350, L=0.66m) large diameter, short length, pleats (120 ~ 350 pleats) and deep, pleats between the gap is small, the filter area is large, compared with the same diameter with the same length filter bag area is 14 ~ 35 times larger, suitable for small site area, small space layout; However, due to the small fold Angle, dust is easy to accumulate, and it is difficult to remove dust. It is suitable for filtering dust removal with the concentration ≤5g/m, and the filtering wind speed should not be >0.6m/min.

    There are three ways to install the cylinder pulse filter: vertical, inclined and horizontal installation. The filter cylinder is installed vertically, and the dust is easy to settle to the ash hopper when the pulse is used. Inclined installation, the top and bottom of the filter cylinder overlap, compact structure, small footprint, easy to change the cylinder, but when cleaning, the dust from the upper filter cylinder settled on the lower filter cylinder, difficult to remove. Horizontal installation, the dust above the lower filter cylinder is more difficult to remove. Inclined cylinder dust collector is suitable for small and medium-sized dust removal system non-viscous, low concentration, coarse dust removal, but also suitable for some old bag dust collector transformation.

Technical parameters

The end cover of the filter cylinder is carbon steel

Material: gaoxiao air filter paper

Skeleton: punched plate, diamond mesh

Filtration accuracy: 10um

Service life: about 2000h

Product Features

1, greatly improve the effective filtration area;

2, ensure a low and stable pressure difference, improve the circulation air volume;

3, the filter cylinder element is small, easy to install;

4. It is especially suitable for industries with high dust concentration.

Scope of application

Widely used in food, pharmaceutical, feed, metallurgy, building materials, cement, machinery, chemical, electric power, light industry dust gas purification and dust material recovery.

Product Features