The function of LF3883 oil filter is to filter out harmful impurities and moisture in the fuel system, protect the normal operation of the engine, reduce wear, avoid blockage, and improve the engine life.
The function of LF3883 oil filter is to filter out harmful impurities and moisture in the fuel system, protect the normal operation of the engine, reduce wear, avoid blockage, and improve the engine life.
Model number: LF3883
Raw water pressure: 10
Inlet and outlet diameter: 220mm
Filter material: paper
Operating temperature: 45° C
Filtration accuracy: 10um
Maximum working pressure difference: 20MPa
Frame material: punching net
Filter element form: Folded
The LF3883 oil filter is composed of a stainless steel bracket and an aluminum shell, and the filter paper is mounted on the bracket to increase the flow area. It should be noted that chemical oil filters cannot be used in common with electric spray filters because they are often subjected to 200 to 300 kpa of fuel pressure.
1. Warm up the engine
2. Open the engine filling port cover.
3. Remove the engine guard plate after lifting the vehicle, remove the oil pan drain screw, and release the old oil
4. Put down the vehicle and remove the old oil filter.
5. Unseal the new oil filter, take an appropriate amount of new oil and smear it on the sealing ring, wipe the oil and dirt in the combination part of the filter with a clean rag, screw on the new filter, tighten with the appropriate oil filter wrench with a certain torque, and wipe the appearance of the new filter and the combination part.
6. Screw on the oil screw, put down the vehicle, fill the new oil, check the oil level, start the vehicle to run at idle speed and medium speed for a while, and pay attention to observe whether the oil filter leaks, and complete the operation after everything is normal.
LF3883 oil filter
Similar ProductsVIEW MORE >