77162-46910 Oil & Gas Separators

Product introduction

77162-46910 Oil Mist Separator filter 's material made of superfine glass fiber mist in the compressed air can be completely filtered through the Separator.

Technical parameter

1. Oil content of compressed air: 3~6PPm Oil gas granule of compressed air: W 0. 1pm Oil filtering efficiency:99%

2. Service life of the filter element: 3500~5200h (greatly affected by the quality of the lubricating oil and the working environment)

3. Initial PSID (Pounds per Square Inch Differential): WO. 02Mpa

4. Maximum working pressure difference: 2.0 (MPa)

5. Material: Glass fiber

6. Filter element form: Folding filter element

7. Properties: alkali resistance, low temperature resistance, high temperature resistance

8. Operating temperature: -20-120（℃）

Use attention

1.  Lubricating oil should be controlled at prescribed position, which is commonly at 1/2-2/3 of the Oil Mist Separator.

2.  Secondary oil return pipe and one way valve should be kept unimpeded and in the prescribed position.

3.  Exhaust steam pressure should be adjusted to the prescribed value.

4.  Make sure the air compressor works at proper temperature and the pressure valve is in good condition.