Air filter 71184-66010

Product introduction

Air filter 71184-66010 is the oil bearing compressed air produced by the main engine into the cooler, the mechanical separation into the oil filter element for filtration, the oil mist in the gas is intercepted and polymerized, the formation of oil droplets concentrated at the bottom of the filter element through the return tubing back to the compressor lubrication system, the compressor discharge more pure, high quality compressed air; Simply put, it is a device that removes solid dust, oil and gas particles and liquid substances from compressed air.

Product parameter

Raw water pressure: 0.24MPa

Inlet and outlet caliber: 200mm

Properties: Acid and alkali resistance

Filter element style: folding filter element

Weight: 3kg

Maximum working pressure difference: 2MPa

Filtration accuracy: 10um

Replacement process

1. Stop the air compressor, close the air pressure outlet, open the drain valve, and confirm that there is no pressure in the system.

2. Disassemble the pipe above the oil and gas barrel and remove the pipe from the pressure maintenance valve outlet to the cooler.

3. Remove the return oil pipe.

4. Remove the bolts from the cover of the oil and gas drum and remove the cover of the oil and gas drum.

5. Remove the oil and gas separator and replace it with a new one.

6. Assemble them in reverse order.