Product
71121311-46910 Recovery oil and gas separator
71121311-46910 Recovery oil and gas separator
71121311-46910 Recovery oil and gas separator
71121311-46910 Recovery oil and gas separator
71121311-46910 Recovery oil and gas separator
71121311-46910 Recovery oil and gas separator

71121311-46910 Recovery oil and gas separator

71121311-46910 Recovery oil and gas separator is a key component that determines the quality of compressed air in the air compressor. High-quality oil and gas separation components can ensure the high efficiency of the compressor, and the life of the filter element can reach thousands of hours.

  • Filtration accuracy 0.1μm

Product introduction

71121311-46910 Recovery oil and gas separator is a key component that determines the quality of compressed air in the air compressor. High-quality oil and gas separation components can ensure the high efficiency of the compressor, and the life of the filter element can reach thousands of hours. The air coming out of the compressor head entrains oil droplets large and small. Large oil droplets are separated when passing through the oil and gas separation tank, while suspended oil particles with a diameter below 1um must be filtered through the micron and glass fiber filter material layers of the oil and gas separation filter element. The oil particles are directly intercepted by the filter material through the diffusion effect of the filter material and the mechanism of inertia collision condensation, so that the suspended oil particles quickly condense into large oil droplets, which gather at the bottom of the filter element under the action of gravity and return to the head lubricating oil system through the concave oil return pipe, so as to discharge pure oil-free compressed air. When the solid particles in the compressed air pass through the oil core, they remain in the filter layer, which leads to the increasing pressure difference of the air compressor filter element. As the service time of the filter element increases, when the pressure difference of the filter element reaches 0.08 to 0.1Mpa, the filter element must be replaced, otherwise the operation cost of the compressor will be increased.

Technical parameter

Filtration accuracy :0.1micro; m

Filtration efficiency is 99.999%

The oil content of compressed air can reach less than 3ppm

The service life can reach about 3500~5200h

Initial pressure difference: 0.02MPa

Filter material selected HV(Binzer) and Lydall glass fiber production company

Performance characteristics

Screw type air compressor three filter mainly refers to air compressor oil filter element, air compressor air filter element and air compressor oil and gas separation filter element three, Xinxiang Lifelte filter Co., Ltd. produced air compressor three filter brands are Ingersoll Rand, Fusheng, Shouli, fidelity, Atlas and so on. Fusheng oil and gas separator is the domestic replacement product of Fusheng screw air compressor filter element produced by us. It has remarkable effect on oil and gas separation, has the advantages of anti-corrosion and anti-aging, and can be used interchangably with the original products.

Working principle

1. The lubricating oil surface in the oil and gas separator barrel should be controlled in the specified position, usually 1/2~2/3 of the oil speculum.

2. The secondary return tubing and check valve shall be kept unobstructed and in the specified position.

3. Adjust the exhaust pressure to the specified value.

4. The operating temperature and pressure of the compressor are normal.

Product details


71121311-46910 Recovery oil and gas separator

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • 71121311-46910 Oil & Gas Separators

    71121311-46910 Oil & Gas Separators

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us