FCM-100-k-n2b05 oil filter

Product overview

FCM-100-k-n2b05 Hadek filter can be used for simultaneous transmission and filtration of large quantities of oil applications, a large size filter element and a high performance gear pump to ensure effective filtration under high flow conditions and long service life of the filter element.

Operation method

(1), the machine is placed on a flat ground or in the car, carefully check whether the machine is loose, pay special attention to the connection between the motor and the oil pump must be fastened and concentric.

(2) Correctly connect the power supply, start the oil pump to check whether the rotation direction is correct, otherwise replace the phase sequence of the power supply.

(3) Connect the inlet and outlet oil pipes and tighten them. Remind the user to pay attention to the fact that the outlet oil pipes and outlet oil pipes must be fastened, otherwise, with the increase of pressure, the outlet oil pipes will be washed away, adding unnecessary trouble.

(4) After fixing the inlet and outlet oil pipe, that is, start the motor button, the oil pump starts to work normally, and the oil filtered out through the three stages is the purification oil.

(5), when a barrel (box) of oil is pumped out to pump another barrel (box) of oil, it is necessary to move quickly to avoid the oil pump idling for a long time, if it is too late to stop, to be restarted after the oil pipe is connected.

Maintenance method

(1), the machine mainly adopts mechanical filtration, and step by step reduce the filter density, to improve the filtration accuracy, it can be seen that in the process of equipment, the first grade filtration is easy to be blocked by impurities, at this time there will be less than the oil intake.

Treatment method: Remove the top cover of the ** filter, take out the filter screen, clean with the same type of cleaning oil, you can restore the work.

(2) If the head is too high in the refueling process, the motor temperature will rise rapidly, and the noise of the oil pump will increase.

Treatment method:

1. Work according to the stipulated head;

2. Work intermittently.

Application field

1, metallurgy: used for rolling machine, continuous casting machine hydraulic system filtration and filtration of various lubrication equipment.

2. Petrochemical: separation and recovery of products and intermediate products in the process of oil refining and chemical production, and particle removal filtration of oil well injection water and natural gas.

3, textile: polyester melt in the process of drawing purification and uniform filtration, air compressor protection filtration, compressed gas removal of oil and water.

4, electronics and pharmaceutical: reverse osmosis water, deionized water treatment filtration, washing liquid and glucose pretreatment filtration.

Product characteristics