OF5L10P3M2B03E oil filter truck replacement

Product introduction

OF5L10P3M2B03E Hydac filter truck belongs to the portable oil filter truck series. It can be used as the filter equipment when new oil is filled, and the purpose of filtration can be completed at the same time when new oil is filled. The oil filter is mainly used in the lubrication system of major power plants, steel mills and other industries, which can effectively control the pollution degree of the working medium and achieve a certain precision of the oil purification effect. The refueling truck produced by our company is mainly composed of motor, filter pump and filter, which is convenient and quick to use. As long as the oil filter inlet and outlet oil pipes are inserted into the tank to be filtered, the motor can be started to work. At the same time, imported pump, imported motor, imported filter material HYDAC filter element configuration, the overall performance is efficient, smooth operation and other characteristics. The hydraulic oil filter is especially suitable for filtering hydraulic oil, anti-wear oil and other filter media, widely used in power plant, steel mill series industries.

Performance characteristics

High precision, reliable performance, compact structure, beautiful appearance, flexible movement, the use of filter element, precision is 3, 5, 10, 20, 30, 40, 50 microns, users can choose freely according to need, just replace different precision filter element. The use and maintenance of the oil filter truck can not be reversed for a long time when starting. Only after confirming the steering can it work normally; After the oil filter is used for a period of time, the noise of the oil pump should be increased due to the blockage of the coarse filter element and the fine filter element. After the fine filter element is used for a period of time, when the pressure is up to 0.4Mpa due to the blockage of pollutants, the machine should be shut down to clean or replace the fine filter element.

Operation method

(1), the machine is placed on a flat ground or in the car, carefully check whether the machine is loose, pay special attention to the connection between the motor and the oil pump must be fastened and concentric.

(2) Correctly connect the power supply, start the oil pump to check whether the rotation direction is correct, otherwise replace the phase sequence of the power supply.

(3) Connect the inlet and outlet oil pipes and tighten them. Remind the user to pay attention to the fact that the outlet oil pipes and outlet oil pipes must be fastened, otherwise, with the increase of pressure, the outlet oil pipes will be washed away, adding unnecessary trouble.

(4) After fixing the inlet and outlet oil pipe, that is, start the motor button, the oil pump starts to work normally, and the oil filtered out through the three stages is the purification oil.

(5), when a barrel (box) of oil is pumped out to pump another barrel (box) of oil, it is necessary to move quickly to avoid the oil pump idling for a long time, if it is too late to stop, to be restarted after the oil pipe is connected.

Product characteristics