Fmm-100-k-n2b05 replacement oil filter trolley

Product introduction

Fmm-100-k-n2b05 oil filter car is produced by Henan Aite Environmental protection filter Equipment Co., LTD., manufacturing process peer, after a large number of customers have proved that the oil filter has a long service life and higher filtering effect, Aite environmental protection is the strength of the oil filter manufacturer in Xinxiang region, This mobile oil filter trolley device can be used to simultaneously transfer and filter a large amount of oil applications, a large size of the filter element and a high performance gear pump to ensure effective filtration under high flow conditions and long service life of the filter element.

Performance characteristics

High precision, reliable performance, compact structure, beautiful appearance, flexible movement, the use of filter element, precision is 3, 5, 10, 20, 30, 40, 50 microns, users can choose freely according to need, just replace different precision filter element. The use and maintenance of the oil filter truck can not be reversed for a long time when starting. Only after confirming the steering can it work normally; After the oil filter is used for a period of time, the noise of the oil pump should be increased due to the blockage of the coarse filter element and the fine filter element. After the fine filter element is used for a period of time, when the pressure is up to 0.4Mpa due to the blockage of pollutants, the machine should be shut down to clean or replace the fine filter element.

Operation method

(1), the machine is placed on a flat ground or in the car, carefully check whether the machine is loose, pay special attention to the connection between the motor and the oil pump must be fastened and concentric.

(2) Correctly connect the power supply, start the oil pump to check whether the rotation direction is correct, otherwise replace the phase sequence of the power supply.

(3) Connect the inlet and outlet oil pipes and tighten them. Remind the user to pay attention to the fact that the outlet oil pipes and outlet oil pipes must be fastened, otherwise, with the increase of pressure, the outlet oil pipes will be washed away, adding unnecessary trouble.

(4) After fixing the inlet and outlet oil pipe, that is, start the motor button, the oil pump starts to work normally, and the oil filtered out through the three stages is the purification oil.

(5), when a barrel (box) of oil is pumped out to pump another barrel (box) of oil, it is necessary to move quickly to avoid the oil pump idling for a long time, if it is too late to stop, to be restarted after the oil pipe is connected.

Product characteristics