Replace FCM100LN3B oil filter

Product introduction

Replace FCM100LN3B oil filter belongs to the portable oil filter vehicle series. It can be used as the filter equipment during the filling of new oil, and the purpose of filtering can be completed at the same time during the filling of new oil. The oil filter is mainly used in the lubrication system of major power plants, steel mills and other industries, which can effectively control the pollution degree of the working medium and achieve a certain precision of the oil purification effect.

Technical parameter

Working flow: 60L/min 100L/min

Working voltage: 380V; 50HZ

Filtration accuracy before pump: 100um

Filtration accuracy after pump: 3-40um

Inlet and outlet oil pipe: 5mm

Sealing material: fluorine rubber ring

Filter pump selection: vane pump and gear pump (transfer valve can be required)

Performance characteristics

1. Reliable performance, low noise;

2. Compact structure and beautiful appearance;

3. Easy maintenance and use;

4. High precision and wide range of hydraulic oil filter element.

Working principle

The machine is placed on a flat ground or in the car, carefully check whether the machine is loose, pay special attention to the connection between the motor and the oil pump must be tight and concentric. Connect the power supply correctly and start the oil pump to check whether the rotation direction is correct. Otherwise, replace the phase sequence of the power supply. Connect the inlet and outlet oil pipes and tighten them. Pay attention to the outlet oil pipes and outlet oil pipes. Otherwise, with the increase of pressure, the outlet oil pipes will be washed away, adding unnecessary trouble. After the inlet and outlet tubing is fixed, the motor button is started, and the oil pump starts to work normally. The oil filtered out through the three stages is the purified oil. When a barrel (box) of oil is pumped out and another barrel (box) of oil is pumped, it is necessary to move quickly to avoid the oil pump idling for a long time. If it is too late, it will be stopped and restarted after the oil pipe is connected.