Operation and maintenance of coalescing dehydrating oil filters
Coalescating dehydrating oil filter is a device that solves the problem of excessive water content in various oils and can clean up particulate pollutants, emulsified water, dissolved water and free water in the oil. The filtration accuracy can reach NAS4-6 level and realize continuous operation.
First, the operation method of coalescing dewatering oil filter
1) Place the converging dewatering oil filter on a flat ground or in the car box, carefully check whether the machine is loose, and pay special attention to the connection between the motor and the oil pump should be tightened and concentric.
2) Correctly connect the power supply, start the oil pump and observe whether the rotation direction is correct, otherwise change the phase sequence of the power supply.
3) Connect the inlet and outlet tubing and tighten it. Otherwise, as the pressure increases, the outlet tubing will be washed away, affecting the use.
4) After the oil inlet pipe is fixed, the motor button can be started, and the oil pump starts to work normally. The oil filtered out through five stages is the purified oil.
5) When a barrel of oil is pumped out and another barrel of oil needs to be pumped, it is necessary to move quickly to avoid the oil pump idling for a long time. If it is too late, it will be stopped and restarted after the oil pipe is connected.
Two, maintenance
1) When the coalescing dewatering oil filter is used to the corresponding degree, the filter element inside will accumulate dirt, the pressure difference becomes larger, and the filtration capacity is reduced. When the pressure difference reaches the corresponding value, the filter element needs to be replaced. When there is a problem in the operation of the oil filter or the filtering effect is not up to the ideal, it is necessary to replace the filter element in time.
2) Oil pump noise becomes abnormally loud:
Treatment method:
1. Check whether the oil pump is concentric with the connecting shaft;
2. Whether the fastening screw is loose or falls off.
The above is the operation method and maintenance of the coalescating dehydrating oil filter introduced by Xiaobian to you. I hope it can help you in the daily use process.
Previous article: Installation precautions of multi - column self - cleaning filter
Next article:Attention to the use of Hydac hydraulic oil filter element