How to clean the impurities in the filter element of high precision oil filter?

How to clean the impurities in the filter element of high precision oil filter?

As we all know, oil filter equipment is widely used in machinery, metallurgy, chemical industry, textile, mining and other industries, which is suitable for a variety of oil filtration. Our common ordinary hydraulic oil, anti-wear hydraulic oil, emulsion, cleaning agent and other media can achieve the oil purification goal through high precision oil filter equipment.

High precision oil filter in operation for a period of time, the filter element will be due to the accumulation of water, gas, mechanical impurities, so that the oil resistance becomes larger, reduce the filtration efficiency; In order to make the oil recover the required performance as soon as possible, close to or reach the new oil standard, it is necessary to clean the filter element in time.

High precision oil filter element cleaning precautions are as follows:

1. Before cleaning the high-precision oil filter, stop the operation of the oil filter, close the oil inlet and outlet pipe, and turn off the power switch.

2. Open the oil valve and drain all the oil in the filter until the oil flows out (open the valve to speed up the oil discharge when the oil is released.

3. After the remaining oil is emptied, open the cover of the filter cartridge, and remove the fine filter and coarse filter element.

4. Place the crude filter element in the oil pan equipped with kerosene, soak it for 30 minutes, and then clean it with air.

5. Clean the sediment on the surface of the filter element with a brush, and then wipe the surface of the filter element with a rag.

6. Install the fine filter and coarse filter element, tighten the filter bolt and clean it before it can be put into use.

I hope the above sharing can be helpful to you in the process of using high-precision oil filter. In the daily use process, it also needs to be maintained and maintained, so as to extend its service life.