Precautions for installing self-cleaning filter equipment

In life, many users in the purchase of self-cleaning filter this equipment, do not know how to install, consumers often call the manufacturer or seller directly for consultation, but with the factory installation instructions of the equipment is sent to the customer, in order to avoid customer installation errors and other situations to explain the precautions for the installation of self-cleaning filter equipment.

1. When installing the equipment, first of all, attention should be paid to the protection of the control box, sensor and transmission part of the equipment to avoid damage to these places.

2. When installing the self-cleaning filter body, it is necessary to connect the pipeline in accordance with the direction indicated by the arrow on the body, so that the direction of the equipment water will be consistent with the arrow on the body.

3. Install the self-cleaning filter at the same time. Before you need to protect water equipment, be sure to get as close as possible to the water equipment.

4, In the power system, the self-cleaning filter should be installed in the middle of the water pump and water equipment, and the closer to the water equipment, the better, the pressure between the water pump and water equipment exceeds the pressure of the filter, the self-cleaning filter can also be installed before the water pump, and to try to close to the water pump.

5. There are two ways to connect the automatic blowdown valve of the equipment, one is flange; Two: silk buckle. The length of the blowdown pipe should not be too long, and the length should be controlled within 10 meters.

6. At the same time of installation of equipment, must take into account the late maintenance, so in the installation of self-cleaning filter should be installed shut-off valve, and ** should also be installed by the bypass pipeline. The two sides of the self-cleaning filter should be set aside enough maintenance space, especially in the filter barrel, should be set aside close to the length of the cylinder, in order to facilitate the replacement of the filter screen in the later period.

7. the specifications of the self-cleaning filter and pipe or flow to match, if a single filter can not meet the requirements of the system can not meet the flow requirements of the system, also have to parallel two or more, easy to meet the requirements of the system filtration, take any one of the installation methods, should pay attention to the automatic blowdown valve outlet direction is horizontal or downward, Better guarantee the effect of sewage discharge.

8. When the self-cleaning filter is installed outdoors, it is necessary to take into account the reasons of the weather and pay attention to the rain weather.

The above is a simple description of the precautions for the installation of self-clear filter equipment. If you have other things you want to know, you can consult Henan Aite Environmental Protection Equipment Co., LTD. The company is focused on R & D, production and manufacture of replacement imported filter element, filter, oil filter and other oil purification products, sewage treatment products, air dust removal products, pure water treatment products, filter press products.