The installation of self-cleaning filter needs to master the following four points, which can be used at ease!

Self-cleaning filter is widely used in the water treatment industry, its simple design and good performance to achieve good filtration effect of sewage. But do you know the fine print of installing self-cleaning filters?

1. When installing and using, attention should be paid to the protection of the control box, sensor and transmission part to prevent damage. Connect the pipe in the direction indicated by the arrow on the body of the self-cleaning filter, so that the direction of water flow is consistent with the arrow on the body. The self-cleaning filter should be installed in front of and as close as possible to the water equipment that needs to be protected.

2. In the power system, the self-cleaning filter should be installed between the pump and the water equipment, the closer to the water equipment, the better. When the pressure before the pump and water equipment exceeds the filter pressure range, the self-cleaning filter can also be installed in front of the pump and as close to the pump as possible. The connection mode of automatic blowdown valve is divided into flanges and silk buckles, and the blowdown pipe should not be too long, not more than 10 meters.

3. Installation should be considered for easy maintenance, self-cleaning filter before and after the installation of shut-off valve, and should be installed by the bypass pipeline. Sufficient maintenance space should be set aside on both sides of the self-cleaning filter, and space close to the length of the cylinder should be set aside in the direction of the filter to replace the filter screen.

4. The specification of the self-cleaning filter should match the pipeline or flow, when a single filter can not meet the requirements of the system flow, two or more parallel, in order to meet the requirements of the system filtration. In any installation form, the outlet direction of the automatic blowdown valve should be horizontal or downward to ensure blowdown effect. When the self-cleaning filter is installed outdoors, please pay attention to rainproof.

The above is Aite environmental protection to introduce the relevant content of the installation of the self-cleaning filter, I hope to help you.