Oil filter in winter operation need to pay attention to these aspects

What are the precautions in the operation of oil filter? According to the working principle, the oil filter is classified into coalesce vacuum oil filter, high-precision oil filter, portable oil filter, etc. In order to improve the purity of crude oil, what should be noted in the operation of the oil filter?

1. In field use, the oil filter should be as close to the oil tank as possible, the oil suction pipe should not be too long, and the coalescating vacuum oil filter should reduce the pipe resistance as far as possible.

2. The connecting pipe (including the oil tank) should be cleaned in advance and the sealing performance should be better.

3. Strictly follow the operating procedures. When starting the oil filter, wait for the vacuum pump, oil pump and heater to operate normally and the internal circulation to be good before the gross oil circulation treatment.

4. If the crude oil contains a lot of mechanical impurities and free water. The moisture and impurities at the bottom should be removed in advance, and then fully filtered by other filtration equipment. After reaching the crude oil standard required by the coalescing vacuum oil filter, the coalescing vacuum oil filter can be used to filter.

5. During operation, strictly monitor the working condition of the oil filter and regularly check the quality of the oil before and after treatment. Check the purifying effect of the oil filter.

6. Insulation measures should be taken for pipes, vacuum tanks and other components during winter operation.

These are the aspects that need to be paid attention to when the oil filter is operated in winter introduced by Aite Environmental Protection. I hope you can help you after reading it. If you also want to know the content of the oil filter, please feel free to contact us for consultation.