Common faults and treatment methods of high precision oil filter
LYC-B high precision oil filter is according to the structure of the oil filter and divided by gear pump, filter, oil return valve, discharge water nozzle, filter bed, front support, rear support, chassis, tie rod, coupling and motor composed of the instrument.
High precision oil filter is widely used in all kinds of hydraulic system, lubrication system, static pressure system, substation and other places, for hydraulic oil, oil, lubricating oil, insulation oil can be refueling, filtering, purification, etc.
So we in the daily use of equipment will often appear some failures, then we will briefly introduce the causes of these failures and how to deal with these failures.
1. The output oil port is not free: generally, it is due to the serious pollution of the filter element or the discharge oil port is higher than 10M. The filter element can be cleaned or replaced and the height of the discharge outlet can be reduced.
2, the output port is not discharged: generally, it is caused by the oil inlet is not put into or into the oil, the oil inlet suction large obstacles, the position of the oil suction port is lower than 2M, the oil suction ball valve is closed and other reasons. The solution is to sink the oil inlet pipe below the oil level, discharge the obstacles, improve the position of the oil suction port, and open the oil suction ball valve.
3. Motor shutdown: it is generally caused by automatic overload tripping or short circuit of fuse core due to large obstacles sucked into the oil inlet. The solution is to check the oil inlet, clean up the obstacles and replace the fuse core.
4, oil temperature is too high: generally due to a long time filter cycle or poor heat dissipation or serious pollution caused by the filter element, the solution is to stop cooling, or replace the filter element.
The above is a simple introduction to you about some common faults of high-precision oil filter, as well as the causes and solutions. I hope you can help you after reading it. If you want to know more about high-precision oil filter, please feel free to contact us for consultation.
Previous article: Principle and application of coalescing dehydrating oil filter
Next article:What are the common problems of coalescing dehydrated oil filter?