What are the cleaning methods and installation steps of LEEMIN hydraulic oil filter element?

What are the cleaning methods and installation steps of LEEMIN hydraulic oil filter element?

LEEMIN filter element is mainly used in the hydraulic system, used to filter the solid particles and colloidal substances in the working medium, control the degree of pollution of the working medium, to achieve the role of purifying the medium.

1. When cleaning LEEMIN hydraulic oil filter element, the following points should be considered:

(1) Filtration accuracy should meet predetermined requirements.

(2) It can maintain sufficient flow capacity for a long time.

(3) LEEMIN hydraulic oil filter element has enough strength, not damaged by hydraulic pressure.

(4) LEEMIN hydraulic oil filter element has good corrosion resistance and can work for a long time at the specified temperature.

(5) LEEMIN hydraulic oil filter element is easy to clean or replace.

2. Installation steps of LEEMIN hydraulic oil filter element

(1) To be installed in the pump suction port: the pump suction circuit is generally equipped with a surface type oil filter, the purpose is to filter out large impurity particles to protect the hydraulic pump, in addition, the filter capacity of the oil filter should be more than twice the pump flow, pressure loss is less than 0.02MPa.

(2) Installed on the outlet oil circuit of the pump: the purpose of installing the oil filter element here is to filter out the pollutants that may invade the valve and other components. The filtration accuracy should be 10 ~ 15μm, and can withstand the working pressure and impact pressure on the oil circuit, the pressure drop should be less than 0.35MPa. At the same time, a safety valve should be installed to prevent clogging of the oil filter.

(3) LEEMIN hydraulic oil filter element is installed on the oil return circuit of the system: this installation plays an indirect filtering role. Generally, a back pressure valve is installed with the filter, and the back pressure valve is opened when the filter is blocked to the corresponding pressure value.

(4) Installed on the system branch oil circuit.

(5) Individual filtration system: large hydraulic system can be specially set up a hydraulic pump and oil filter to form a filtration circuit. In addition to the oil filter required for the whole system, a separate fine oil filter is often installed in front of some important components (such as servo valves, etc.) to ensure their normal operation.

The above is to introduce the cleaning method and installation steps ofLEEMIN hydraulic oil filter element. I hope you can help you in the daily use process. If you also want to know the relevant content, please feel free to contact us for consultation.