With the rapid development of hydraulic industry technology, hydraulic system parameters are constantly trending towards high pressure, high precision and high power. At the same time, higher requirements are placed on the reliability of hydraulic system work, and the requirements for oil cleanliness are also getting higher and higher. The high-precision oil purifier can not only filter new oil before filling, but also can be used for regular filtration of hydraulic lubricating oil. So, what precautions does it have during operation?
1. When used on site, the oil filter should be as close to the oil tank as possible, the oil suction pipeline should not be too long, and the oil filter should minimize the pipeline resistance.
2. The connecting pipe (including the fuel tank) should be cleaned in advance and the sealing performance is good.
3. Strictly follow the operating procedures. When starting the oil filter, wait for other components to operate normally and the internal circulation is good before performing the crude oil circulation treatment.
4. If the crude oil contains a lot of mechanical impurities and free moisture. It is necessary to remove the moisture and impurities at the bottom in advance, and then use other filtering equipment (such as centrifugal oil filter, plate and frame oil filter) to fully filter, after reaching the crude oil standard required by the oil filter, it can be filtered to avoid affecting the life of the oil filter.
5. During operation, strictly monitor the working condition of the oil filter, and regularly check the quality of the oil before and after treatment. Monitor the purification effect of the oil filter.
6. Pipes and other components should take thermal insulation measures during winter operations.
The above is the relevant content of the high-precision oil purifier briefly introduced to you by the editor. I hope it can be helpful to you. If you want to know more about the relevant content, please feel free to contact us for consultation.
