39751391 Oil & gas separator filter element fittings

Product introduction

39751391 Oil & gas separator filter element fittings is made of imported ultrafine glass fiber. The gas mist in the compressed air can be completely filtered through the oil mist separator.

Technical parameter

1. Oil content of compressed air: 3~6PPm Oil gas granule of compressed air: 0.1pm Oil filtering efficiency:99%

2. Service life of the filter element: 3500~5200h (greatly affected by the quality of the lubricating oil and the working environment)

3. Applicable compressor type: screw compressor

4. Accessories Use: filter

5. External diameter: 194 mm

6. Height: 216 mm

Use attention

1. Initial PSID (Pounds per Square Inch Differential): w.02mpa

2. Lubricating oil should be controlled at prescribed position, which is commonly at 1/2-2/3 of the Oil Mist Separator. •Lubricating oil should be controlled at prescribed position, which is commonly at 1/2-2/3 of the oil mist separator.

3. Secondary oil return pipe and one way valve should be kept unimpeded and in the prescribed position.

4. Exhaust steam pressure should be adjusted to the prescribed value.

5. Make sure the air compressor works at proper temperature and the pressure valve is in good condition.