35123520 filter air compressor filter element

Product introduction

The Ingersoll Rand filter elementis installed at the air inlet of the Ingersoll Rand screw type air compressor filter element, which is used to filter impurities such as dust, sand, water and oil mist in the air source, to ensure the cleanliness of the air source, and to improve the service life of the oil and gas separation filter element, oil filter element and lubricating oil, to ensure the safe and efficient operation of the air compressor system.

Technical parameter

Filter element model: 39831888

Filtration accuracy :5µm~10µm

Filtration efficiency 98%

The service life can reach about 2000h

Ingersoll Rand filter material is made of pure wood pulp filter paper made of HV and Ahlstrom

Warm tip: air compressor filter element should be placed in a dry and ventilated place, so as to avoid moisture affecting the service life

Performance characteristics

Air filter has inertia type, filter type and oil bath type 3 ways.

(1) Inertia: because the density of impurities is higher than that of air, when the impurities rotate or turn sharply with the air, the action of centrifugal inertia force can make the impurities separated from the air stream.

(2) Filter type: guide the air through the metal screen or filter paper, the impurities will be blocked and adhered to the filter element.

(3) Oil bath type: oil tray is provided at the bottom of the air filter, the use of air flow to impact the oil, the impurities are separated and stuck in the oil, and the oil droplets stirred up by the air flow through the filter element, and adhere to the filter element. Air flowing through the filter element can further absorb impurities, so as to achieve the purpose of filtration.

Product details