PHC-330 pressure line filter

Product introduction

PHC-330 pressure line filter is installed in the pressure pipeline of lubrication and hydraulic system, filter out the working medium, the solid particles and colloids brought in by the outside world and the wear of its own components. Prevent the damage of high precision components in hydraulic system due to pollution, so as to reduce system failures and extend the service life of components. Effectively control the pollution degree of the working medium. Filter element filter material can be selected according to the need; The upper and lower shell of this series filter is made of carbon steel, which has the advantages of light weight, exquisite structure and high cost performance. Choose differential pressure transmitter as required.

Technical parameter

1: Working medium: mineral oil, emulsion, water mdash; Glycol, phosphate ester hydraulic oil, water

2: Working pressure (Max) : 42MPa

3: Working temperature: -25~110deg; C

4: Nominal flow: 060, 110, 160, 240, 330, 420, 660, etc

5: Filtration accuracy: 3um, 6um, 12um, 25um, 5um, 10um, 20um, 30um, 40um, 60um, etc

6: signaling pressure difference: 0.7MPa

Performance characteristics

1. High porosity and excellent permeability, less pressure loss, large flow

2. Large contaminant capacity, high filtration accuracy, long replacement cycle

3. Excellent temperature and corrosion resistance, long-term use at 480℃, corrosion resistance to nitric acid, alkali, organic solvents, drugs

4. Can be broken wave, to increase the filter area, and welding processing

5. High strength, even if the liquid strong scour, strong vibration, fiber does not fall off

6. Can be cleaned and regenerated, can be used many times.

Product details