the QU-H40 filter installed in the hydraulic system pressure pipe
1. the QU-H40 filter installed in the hydraulic system pressure pipe, to filter the hydraulic oil mixed with mechanical impurities and chemical changes in the hydraulic oil itself produced by gum, asphaltene, carbon slag, so as to prevent the valve core stuck, throttle orifice gap and damping hole plugging and hydraulic components too fast wear and other failures.
2. The filter has good filtering effect and high precision, but it is difficult to clean after plugging, and the hydraulic oil filter element must be replaced.
3. The filter is provided with a differential pressure signaling device. When the filter element is polluted and blocked until the differential pressure of the inlet and outlet is 0.35MPa, the switch signal will be sent.
4. The filter element is made of glass fiber filter material, which has the advantages of high filtration accuracy, large oil filtration capacity, small original pressure loss, large contaminant capacity, etc. The filtration accuracy is calibrated by absolute filtration accuracy, and the filtration ratio is beta; 3, 5, 10, 20gt; 200, filtration efficiency nge; 99.5%, in line with ISO standards.
Working pressure: 32Mpa
Connection mode: flange connection
Filter element material: paper
mdash; mdash; transmitter
Installation: Plate type, flip type, inverted pile plate
Filter element type: HX-800*10
QU-H40 filter
Similar ProductsVIEW MORE >