ZU-H series pressure line filter

Product introduction

ZU-H series pressure pipeline filter can not only be applied to the hydraulic lubrication system of various industries, but also applicable to various positions of the hydraulic station, such as the oil suction part, the oil return part, the pipeline part, etc. ZU-H630*10P high pressure pipeline oil filter is used between high pressure pipelines, connecting between pipelines. The filter belongs to the high pressure system, withstand the high pressure of 32Mpa. It is mainly aimed at removing impurities from hydraulic oil, removing impurities from oil, and maintaining the service life of the system and components. Can be replaced according to the use of the filter element, maintain regular replacement, to promote the normal operation of the hydraulic system.

Technical parameter

Filter model: ZU-H630*10P

Use medium: hydraulic fluid, can filter water - glycol

Filter flow: 630L/min

Filtration accuracy: 10um

Working pressure: 32Mpa

Connection mode: flange connection

Filter element material: paper

mdash; mdash; transmitter

Installation: Plate type, flip type, inverted pile plate

Performance characteristics

ZU-H pressure pipeline filter has good filtering effect and high precision, but it is difficult to clean after plugging, and the filter element must be replaced. The filter is provided with a differential pressure signaling device. When the hydraulic oil filter element is polluted and blocked until the differential pressure of the inlet and outlet is 0.35MPa, the switch signal is sent. At this time, the filter element is replaced to achieve the purpose of protecting the system safety. The filter element is made of glass fiber filter material, which has the advantages of high filtration accuracy, large oil passing capacity, small original pressure loss and large contaminant carrying capacity. The filtration accuracy is calibrated by absolute filtration accuracy and the filtration ratio is beta. 3. beta; 5. beta; 10. beta; 20ge; 200, filtration efficiency eta; ge; 99.5%. The evaluation methods were ISO16889-99 and GB/T18853-2002.

Working principle

The filter is divided into chemical fiber type, paper type, mesh type and line suction type. Chemical fiber filter is better than paper filter efficiency, high precision, chemical fiber filter and paper filter is more difficult to clean after plugging, so the filter must be replaced.

The filter is equipped with a differential pressure signaling device. When the filter element is polluted and blocked, the differential pressure of the inlet and outlet reaches 0.35mpa, the signal will be sent. At this time, the filter element should be cleaned or replaced.

The filter element is made of glass fiber material, which has the advantages of high filtration accuracy, large oil passing capacity, small original pressure loss, large sodium pollution, etc. Its filtration accuracy is calibrated by absolute filtration accuracy, filtration ratio beta; 3/5/10/20ge; 200, filtration efficiency ge; 95%, in line with ISO standards.

Product details