PHA series pressure line filter

Product introduction

PHA series of pressure line filter, can be installed in different pressure levels of the pressure line, for the ultimate removal of chemical interference caused by dirt. Especially suitable for automatic control systems and servo systems, it can high precision control components and executive components due to pollution and premature wear or jam, thus reducing failure. Prolong the service life of components. The hydraulic oil filter element of the filter adopts imported glass fiber filter material, which has the advantages of high filtration accuracy, strong oil passing ability, small original pressure loss and large amount of pollution

Technical parameter

Working medium: mineral oil, emulsion, water-ethylene glycol, phosphate ester hydraulic fluid (Kapok shaping filter paper is only suitable for mineral oil)

Working pressure (max):42mpa Working temperature :--25℃ ~ 110℃

Sending pressure difference: 0.5mpa bypass valve opening pressure difference :0.6mpa

Performance characteristics

Compared with the same type of filter, compact structure and small volume. It is convenient to change the filter element with a wide pressure range. The user can open the upper cover according to the installation space and replace the filter element. The filter element can also be removed from the bottom by unscrewing the shell.

Easy to install and fix: if the user has difficulties in the standard installation, the four screws on the cover can be broken off and the cover can be rotated

180deg; In this way, the direction of medium flow is changed. The filter is provided with a by-pass valve and a signaling device, double protection, when the filter element dirt clogs the inlet and outlet pressure difference when the signaling device sends a message, the filter element must be replaced.

Product details