The pressure line filter is installed on the pressure line of the hydraulic system. It is mainly used to filter out the mechanical impurities mixed in the hydraulic oil and the colloid, asphaltene and carbon residue produced by the chemical change of the hydraulic oil itself.
The pressure line filter is installed on the pressure line of the hydraulic system. It is mainly used to filter out the mechanical impurities mixed in the hydraulic oil and the colloid, asphaltene and carbon residue produced by the chemical change of the hydraulic oil itself. Prevent the spool from being stuck, the clogging of the throttling hole gap and the damping hole, and the rapid wear of the hydraulic components. The pressure line filter produced by Aite Environmental Protection Company has the advantages of good filtering effect, high precision, large oil passing capacity, small original pressure loss, and large dirt holding capacity, which can meet the needs of the majority of users.
Model: ZU-H
Nominal pressure: 32Mpa
Filtration precision: 1-30μm
Diameter: 15-55mm
Flow: 10-800L/min
Connection method: thread, flange, plate
1. It can maintain sufficient flow capacity for a long time.
2. It has sufficient strength and will not be damaged by the action of hydraulic pressure.
3. The filtering precision can meet the different needs of the majority of users.
4. The filter is easy to clean and replace, saving time and effort.
Pressure Line Filters
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
