DFB series superimposed high pressure plate filter

Product introduction

DFB series superimposed high pressure plate filter can be directly installed on the valve block of the system, used to further remove or block the pollution particles caused by external invasion or wear of components during work, especially suitable for automatic control systems and servo systems, it can prevent high precision control components and executive components due to pollution and rapid wear or stuck, thereby reducing failure, Prolong the service life of components. 

The hydraulic oil filter is provided with a pressure difference signaling device, when the filter element pollution and blockage to the inlet and outlet pressure difference of 0.5MPa, that is, the switch signal, at this time should be replaced or cleaned filter element, in order to achieve the purpose of protecting the system.

Technical parameter

1. Use medium: water-ethylene glycol, hydraulic oil

2. Diameter size: 16-32mm

3. Nominal flow: 30-660L/min

4. Filtration accuracy: 3-30um

5. Nominal pressure: 32Mpa

6. Power of transmitter: 220v /50W

Application field

1. Metallurgy: Used for rolling machine, continuous casting machine hydraulic system filtration and filtration of various lubrication equipment

2. Petrochemical: can be used for oil refining, chemical production in the process of product separation and recovery, liquid purification, tape, CD and photographic film in the process of manufacturing purification, oil well water and gas dust particles filtration.

3. Hydraulic system related to textile, electronic pharmaceutical, thermal power and nuclear power industries.

Product characteristics

1, DFB series superimposed high pressure plate filter has the characteristics of compact installation structure and small volume:

2, and the filter element adopts imported glass fiber filter material, which has the advantages of high filtration accuracy, large oil passing capacity, small original pressure loss, large amount of pollution:

3, the filtration accuracy of the ** filtration accuracy calibration, filtration ratio β3, β5, β10, β20≥200, filtration efficiency η≥99.5%, the evaluation method is ISO16889-99 and GB/T18853-2002:

4, the oil filter for high pressure pipeline, temperature resistance, pressure resistance, long service life.

Product characteristics