Aite Environmental protection DFB series high pressure plate filter can be installed directly on the valve block of the system, used to further remove or block the pollution particles caused by external intrusion or wear during the component work filter.
Aite Environmental protection DFB series high pressure plate filter can be installed directly on the valve block of the system, used to further remove or block the pollution particles caused by external intrusion or wear during the component work filter.
Aite DFB series high pressure plate filter is equipped with differential pressure signaling device. When the filter element is polluted and blocked to the inlet and outlet pressure difference of 0.5Mpa, the switch signal is sent.
At this time, the filter element should be replaced or cleaned. It also has the characteristics of compact installation structure, small volume, filter element using imported glass fiber filter material, with high filtration accuracy, oil capacity, small original resistance, large amount of pollution and other advantages, the filtration ratio β3, β5, β10, β20≥200, filtration efficiency η≥99.5%. The evaluation methods were ISO16889-99 and GB/T18853-2002.
1. Use medium: water-ethylene glycol, hydraulic oil
2. Diameter size: 16-32mm
3. Nominal flow: 30-660L/min
4. Filtration accuracy: 3-30um
5. Nominal pressure: 32Mpa
6. Power of transmitter: 220v /50W
Aite Environmental protection DFB series high pressure plate filter
Similar ProductsVIEW MORE >
Export01@aiteeps.com
+0086-13015535452
