YPM medium pressure line filter

Product introduction

YPM medium pressure line filter is made of high quality stainless steel, the inner cylinder is stainless steel sheet punching forming filter cylinder, tight mesh structure, joint connection, easy to disassemble and clean, suitable for beer, CIP cleaning liquid filtration, can be selected according to the actual use of users, 20-100 mesh stainless steel mesh.

The pressure line filter in YPM is used to remove solid impurities during liquid transportation. When the liquid flows through the filter, the impurities are filtered out, which can protect the pump, compressor, instrument and other equipment working normally. When cleaning is needed, as long as the detachable filter cartridge out, remove the filtered impurities, reload can be, the use and maintenance is very convenient.

Product characteristics

1. Simple design structure.

2. reverse cleaning time is short, flow, pressure loss is small.

3, intelligent control system (PLC, PAC) control, high degree of automation.

4. The equipment can be connected with the central control system.

5. high precision filtration, water quality is stable.

6. filter lifetime use, no need to replace.

7. long service life.

8. can be applied to different raw water quality and water requirements.

9. Fewer wearing parts, no consumables, low operating cost, simple operation and management.

Technical parameter

Working medium: general hydraulic oil phosphoric acid hydraulic oil emulsion water - glycol

Flow: 60-660L/min

Filtration accuracy: 1-30μm

Working pressure: 21MPA

Operating temperature: -25℃ -- 110℃

Connection mode: flange thread

Application field

Pipeline filter has the advantages of compact structure, large filtration capacity, small pressure loss, wide application range, easy maintenance, etc. Its main applicable materials are:

1. chemical, petrochemical production of weak corrosive materials, such as: water, oil, ammonia, hydrocarbons, etc.

2. Corrosive materials in chemical production, such as caustic soda, soda ash, concentrated sulfuric acid, carbonic acid, aldehyde acid, etc.

3. Low temperature materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various coolants.

4. Materials with hygiene requirements in food and pharmaceutical production, such as beer, beverage, dairy products, syrup, etc.

Product characteristics