YPM240 medium pressure pipe filter

Product introduction

YPM240 medium pressure pipeline filter is made of high quality stainless steel, the inner cylinder is stainless steel sheet punching forming filter cylinder, tight mesh structure, joint connection, easy to remove and clean. 

Widely used in beer, CIP cleaning liquid filtration, this filter can be selected according to the actual use of users, 20-100 mesh stainless steel mesh matching. The pipeline filter is the equipment to remove solid impurities in the process of pipeline conveying liquid. 

When the liquid flows through the oil filter, the impurities are filtered out, which can protect the normal work of the machine pump, compressor, instrument and other equipment. When cleaning is needed, as long as the detachable filter cartridge out, remove the filtered impurities, reload can be, the use and maintenance is very convenient.

Product characteristics

1. High porosity and excellent permeability, less pressure loss, large flow.

2. Pipeline filter has large contaminant capacity, high filtration accuracy and long replacement cycle.

3. Excellent temperature and corrosion resistance, long-term use at 480℃, corrosion resistance to nitric acid, alkali, organic solvents, drugs.

4. Can be broken wave, to increase the filter area, and welding processing.

5. High strength, even if the liquid strong scour, strong vibration, fiber does not fall off.

6. Can be cleaned and regenerated, can be used many times.

Technical parameter

Working medium: mineral oil, emulsion, water - ethylene glycol, phosphate ester hydraulic fluid (Kapok shaping filter paper is only suitable for dry mineral oil)

Working pressure (max)21MPa

Operating temperature 25℃~110℃

Signal pressure difference of 0.5MPa

Bypass valve opening pressure difference 0.6MPa

Application field

Pipeline filter has the advantages of compact structure, large filtration capacity, small pressure loss, wide application range, easy maintenance, etc. Its main applicable materials are:

1. chemical, petrochemical production of weak corrosive materials, such as: water, oil, ammonia, hydrocarbons, etc.

2. Corrosive materials in chemical production, such as caustic soda, soda ash, concentrated sulfuric acid, carbonic acid, aldehyde acid, etc.

3. Low temperature materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various coolants.

4. Materials with hygiene requirements in food and pharmaceutical production, such as beer, beverage, dairy products, syrup, etc.

Product characteristics