In-line filter_Aite(Henan) environmental protection equipment Co.

Product introduction

Pressure pipeline filter YPH160H7FD1B7 installed in the hydraulic system pressure pipeline, filter the solid particles and gel in the working medium, effectively control the degree of pollution of the working medium. Differential pressure transmitter and bypass valve can be equipped according to your needs.

Filter element filter materials are made of non-woven fabric, glass fiber, cotton wood pulp filter paper, stainless steel sintered felt, stainless steel metal mesh. The upper and lower shell is made of carbon steel, small size, light weight, exquisite structure, beautiful appearance and reliable performance.

Technical parameter

1: Working medium: mineral oil, emulsion, water - ethylene glycol, phosphate ester hydraulic oil, water

2: Working pressure (Max) : 42MPa

3: Operating temperature: -25~110°C

4: Nominal flow: 060, 110, 160, 240, 330, 420, 660, etc

5: Filtration accuracy: 3um, 6um, 12um, 25um, 5um, 10um, 20um, 30um, 40um, 60um, etc

6: signaling pressure difference: 0.7MPa

Performance characteristics

1. High porosity and excellent permeability, less pressure loss and large flow rate;

2. Large contamination capacity, high filtration accuracy, long replacement cycle;

3. Excellent temperature and corrosion resistance, long-term use at 480℃, corrosion resistance to nitric acid, alkali, organic solvents, drugs;

4. Can be broken wave, to increase the filtering area, and welding processing;

5. High strength, even if the liquid strong scour, strong vibration, fiber does not fall off;

6. Can be cleaned and regenerated, can be used many times.

Application field

1. The core part of the filter is the filter core, the filter element is composed of the filter frame and stainless steel wire mesh stainless steel wire mesh is suitable for loss parts need special protection;

2. When the filter works for a period of time, certain impurities are deposited in the filter core, the pressure drop increases, the flow rate will decrease, and the impurities of the filter core should be removed in time;

3. When cleaning impurities, pay special attention to the stainless steel wire mesh on the filter element can not be deformed or damaged, otherwise the filter is installed again, the purity of the filtered medium can not meet the design requirements, compressor, pump, instrument and other equipment will be destroyed;

4. If the stainless steel wire mesh is found deformed or damaged, it needs to be replaced immediately.