PLF-BH-C160X5P Pressure Line filter

Product introduction

PLF-BH-C160X5P Pressure line filters can be installed on different pressure levels of the pressure line to further remove or block impurities due to external wear during component operation, as well as the chemical process of the medium itself. Especially suitable for automatic control system and servo system. It can prevent high-precision control components and executive components from premature wear or sticking due to pollution, thus reducing failures and extending the service life of components.

PLF series filter element adopts imported glass fiber filter material, which has the advantages of high filtration precision, strong oil passing ability, small original pressure loss and large amount of pollution.

Technical parameter

Model number: PLF-BH-C160X5P

Flow rate: 160L/min

Filtration accuracy: 5μm

Nominal pressure: 32MPa

Connection mode: thread, flange

Working medium: general hydraulic oil phosphoric acid hydraulic oil emulsion water - glycol

Product characteristics

1. Compared with the same flow filter, compact structure and small volume.

2. Wide range of use pressure.

3. It is convenient to change the filter element. The user can open the upper cover and replace the filter element according to the installation space, or unscrew the shell (put the oil first) and remove the filter element from below.

4. Easy to install and fix: if the user has difficulty in installing according to the standard flow direction, the four screws on the cover can be removed, and the cover will rotate 180 degrees, so as to change the direction of the medium flow.

5. The filter is provided with a by-pass valve and differential pressure signaling device, double protection function, when the filter element is polluted and blocked until the inlet and outlet differential pressure value is set for the signaling device, the signaling device will send a message, at this time, the filter element must be replaced.

Product characteristics