Product
Pipeline coarse filter series
Pipeline coarse filter series
Pipeline coarse filter series
Pipeline coarse filter series
Pipeline coarse filter series
Pipeline coarse filter series

Pipeline coarse filter series

Pipeline coarse filter series​, can also be used for gas or other medium large particulate filtration, installed on the pipeline can remove the fluid in the large solid impurities.

  • Nominal diameter/nominal pressure DN15 -- 1500mm PN0.6 -- 20.0MPa
  • Filtration accuracy: 10-100um

Product overview

Pipeline coarse filter series, can also be used for gas or other medium large particulate filtration, installed on the pipeline can remove the fluid in the large solid impurities, so that the machine equipment (including compressors, pumps, etc.), instruments can work and operate normally, to stabilize the process, ensure the role of production.

Matters needing attention

When choosing an oil filter, the following points should be considered:

(1) Filtration accuracy should meet predetermined requirements.

(2) It can maintain sufficient flow capacity for a long time.

(3) The filter core has enough strength and is not damaged by hydraulic pressure.

(4) The filter core has good corrosion resistance and can work at the specified temperature for a long time.

(5) The filter core is easy to clean or replace.

Installation position

(1) To be installed in the pump suction port:

The suction circuit of the pump is generally equipped with a surface type oil filter, the purpose is to filter out large impurity particles to protect the hydraulic pump, in addition, the filter capacity of the oil filter should be more than twice the pump flow, pressure loss is less than 0.02MPa.

(2) Installed on the pump outlet oil circuit:

The purpose of the oil filter is to filter out contaminants that may invade components such as valves. The filtration accuracy should be 10~15μm, and can withstand the working pressure and impact pressure on the oil circuit, the pressure drop should be less than 0.35MPa.

(3) Installed on the oil return circuit of the system: this installation plays an indirect filtering role. Generally, a back pressure valve is installed with the filter. When the filter is blocked up to a certain pressure value, the back pressure valve is opened.

(4) Installed on the system branch oil circuit.

(5) Separate filtration system: large hydraulic system can be set up a hydraulic pump and oil filter to form an independent filtration circuit.

In addition to the oil filter required by the whole system, a special fine oil filter is often installed in front of some important components (such as servo valve, precision throttle valve, etc.) to ensure their normal operation.

Product characteristics管路过滤器落地页英文版9


Pipeline coarse filter series

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • WU-A250*10 hydraulic oil filter

    WU-A250*10 hydraulic oil filter

  • PLF-BH-E240X10FP line filter

    PLF-BH-E240X10FP line filter

  • PLF-BH-C160X5P Pressure Line filter

    PLF-BH-C160X5P Pressure Line filter

  • SP-06 rotary pipeline filter

    SP-06 rotary pipeline filter

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us