6732-71-6110 diesel filter function is to filter out harmful impurities and moisture in the fuel system, protect the normal operation of the engine, reduce wear, avoid blockage, improve engine life.
6732-71-6110 diesel filter function is to filter out harmful impurities and moisture in the fuel system, protect the normal operation of the engine, reduce wear, avoid blockage, improve engine life.
The replacement cycle is about 5000 to 10000 km. If the diesel filter is blocked, the diesel engine will suffer from insufficient power, weak driving and even black smoke exhaust due to insufficient oil supply and low oil pressure. Therefore, we should comply with the replacement requirements of the diesel filter and replace it regularly to ensure that the diesel filter can always filter the diesel normally.
1. Close the oil inlet ball valve and open the upper end cover. (aluminum alloy upper end cover to use a flat-head screwdriver from the side notch gently pry open);
2. Unscrew the plug wire of the sewage discharge port to discharge the dirty oil;
3. Loosen the fastening nut on the upper end of the filter element, the operator puts on oil-proof gloves to grip the filter element, and vertically remove the old filter element;
4. Replace the filter element, pad the sealing ring (the lower end comes with a sealing pad), and tighten the nut;
5. Tighten the oil drain plug, cover the upper end cover (pay attention to the washer), and tighten the bolts.
Electronics, food and beverage, petrochemical, painting, resin, paint, ink, pharmaceutical, water treatment, metal processing, mining, electric power, light industry, shipping, catering, and other fields.
6732-71-6110 diesel filter element
Similar ProductsVIEW MORE >