RFA-25 Series LEEMIN Return Oil Filter

Product introduction

The RFA-25 series LEEMIN oil return filter is installed on the oil return pipeline at the end of the system, and its function is to filter out the pollutants generated or invaded in the system before returning to the oil tank. Although it is a low-pressure pipeline, pulsation or pressure shock may also occur according to the operating conditions of the transmission, so the material and strength of the components should be fully considered.

Technical parameter

Filter model: RFA series

Nominal flow: 25-1000L/min

Nominal pressure: 1.6MPA

Filtration precision: 1-30μm

Nominal diameter: 15-90mm

Connection method: thread, flange

Features

1. The RFA-25 series LEEMIN oil return filter is directly installed on the oil tank cover, the filter head is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is connected with a pipe type and a flange type, thus System piping is simplified.

2. When the filter element is blocked by pollutants or the system liquid temperature is too low, flow pulsation and other factors cause the oil inlet pressure to be 0.35Mpa, the signalling device will send a signal indication.

3. It has the advantages of high filtration precision, large oil passing capacity, small original pressure loss, and large dirt holding capacity.

Product Details