RFA-630 Series Return Oil Filter

Product introduction

The RFA-630 series oil return filter is mainly installed on the oil return line of the hydraulic system. Various dirt such as abrasive particles generated by various hydraulic components during the working process can be intercepted by setting the oil return line oil filter to avoid repeated Back to the oil tank. The allowable pressure difference of the oil filter in the oil return line, according to different pressure levels, ranges from 0.3 to 0.5 MPa. The accuracy is determined according to the requirements of the oil contamination degree.

Features

1. The RFA-630 series oil return filter is directly installed on the oil tank cover, the filter head is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is equipped with a pipe and flange connection, thereby simplifying the system piping.

2. When the filter element is blocked by pollutants or the system liquid temperature is too low, flow pulsation and other factors cause the oil inlet pressure to be 0.35Mpa, the signalling device will send a signal indication.

3. It has the advantages of high filtration precision, large oil passing capacity, small original pressure loss, and large dirt holding capacity.

Application field

1. Metallurgy: used for the filtration of the hydraulic system of rolling mills and continuous casting machines and the filtration of various lubrication equipment.

2. Petrochemical: separation and recovery of products and intermediate products in the process of refining and chemical production.

3. Textile: Purification and uniform filtration of polyester melt in the process of drawing, protection and filtration of air compressors, and degreasing and dehydration of compressed gas.

4. Thermal power and nuclear power: oil purification of gas turbine, boiler lubrication system, speed control system, bypass control system, purification of feed water pump, fan and dust removal system.

Product Details