Product
TF-25 series oil suction filter
TF-25 series oil suction filter
TF-25 series oil suction filter
TF-25 series oil suction filter
TF-25 series oil suction filter
TF-25 series oil suction filter

TF-25 series oil suction filter

TF-25 series oil suction filter can be directly installed on the side, top or bottom of the oil tank, the oil suction cylinder is immersed below the liquid level in the oil tank, the filter head is exposed outside the oil tank, and is equipped with self-sealing valve, bypass valve, filter element pollution Blocking the transmitter and other devices, so that the oil in the oil tank will not flow out when the filter element is replaced and cleaned.

  • Working pressure: 21bar-210bar
  • Filtration precision: 1μm~100μm

Product description

TF-25 series oil suction filter can be directly installed on the side, top or bottom of the oil tank, the oil suction cylinder is immersed below the liquid level in the oil tank, the filter head is exposed outside the oil tank, and is equipped with self-sealing valve, bypass valve, filter element pollution Blocking the transmitter and other devices, so that the oil in the oil tank will not flow out when the filter element is replaced and cleaned.

Technical parameter

Filter material: glass fiber-BN, stainless steel woven mesh-W, wood pulp filter paper-P, stainless steel sintered mesh-V

Filtration precision: 1μm~ 100μm

Working pressure: 21bar-210bar

Working medium: general hydraulic oil, hydraulic oil, emulsion, water-glycol

Working temperature: -30℃~+110℃

Sealing material: fluorine rubber ring, nitrile rubber

Performance characteristics

1. Easy installation and connection, simplifying the system pipeline;

The filter can be directly installed on the side, bottom or upper part of the oil tank. The filter head is exposed outside the oil tank, and the oil suction cylinder is immersed below the liquid level in the oil tank. The oil outlet is provided with pipe and flange connections. There are self-sealing valves and other devices, so that the pipeline does not need to install other pipe fittings such as stop valves, so that the pipeline is simplified and the installation is convenient.

2. Set up a self-sealing valve to make it convenient to replace, clean the filter element or maintain the system;

When replacing, cleaning the filter element or maintaining the system, just unscrew the filter end cover (cleaning cover), at this time the self-sealing valve will be automatically closed, isolating the oil circuit, so that the oil in the tank will not flow out, so that cleaning, It is convenient to replace the filter element or maintain the system. If the top is opened and self-sealed, it can also be used to discharge oil from the oil tank.

3. The oil suction filter has a filter element pollution signaler and an oil bypass valve, which improves the reliability of the hydraulic system;

When the filter element is blocked by pollutants until the vacuum degree of the oil outlet is 0.018MPa, the transmitter will send a signal, and the filter element should be replaced or cleaned in time. If the machine cannot be shut down immediately or no one comes to replace the filter element, the oil bypass valve on the upper part of the filter element will automatically open (the opening value is: vacuum 0.02MPa) to avoid air suction failure of the oil pump.

Product Details

TF-25 series oil suction filter

email

aiteepcom@163.com

whatsapp

+ 0086-13015535452

Similar ProductsVIEW MORE >

  • TF-25x100 oil suction filter

    TF-25x100 oil suction filter

  • Online message

    We will contact you within 24 hours

    GET GUIDANCE
    Copyright © Aite(Henan) environmental protection equipment Co.

    icon_online

    icon_email

    Contact Us

    icon_wehtapp Contact Us