TF-40 series oil suction filter

Product introduction

TF-40 series oil suction filter is installed directly at the oil suction port of the oil pump to protect the oil pump and other hydraulic components. TF oil suction filter can avoid inhalation of polluted impurities, control the pollution of hydraulic system, and improve the cleanliness of hydraulic system. The filter can be directly installed on the side, top or bottom of the fuel tank. The oil suction cylinder is immersed below the liquid level in the fuel tank. This product has the advantages of novel design, convenient installation, large oil passing capacity, low resistance, and convenient cleaning or replacement of the filter element.

Performance characteristics

1. Easy installation and connection, simplifying the system pipeline;

The filter can be directly installed on the side, bottom or upper part of the oil tank. The filter head is exposed outside the oil tank, and the oil suction cylinder is immersed below the liquid level in the oil tank. The oil outlet is provided with pipe and flange connections. There are self-sealing valves and other devices, so that the pipeline does not need to install other pipe fittings such as stop valves, so that the pipeline is simplified and the installation is convenient.

2. Set up a self-sealing valve to make it convenient to replace, clean the filter element or maintain the system;

When replacing, cleaning the filter element or maintaining the system, just unscrew the filter end cover (cleaning cover), at this time the self-sealing valve will be automatically closed, isolating the oil circuit, so that the oil in the tank will not flow out, so that cleaning, It is convenient to replace the filter element or maintain the system. If the top is opened and self-sealed, it can also be used to discharge oil from the oil tank.

3. The oil suction filter has a filter element pollution signaler and an oil bypass valve, which improves the reliability of the hydraulic system;

When the filter element is blocked by pollutants until the vacuum degree of the oil outlet is 0.018MPa, the transmitter will send a signal, and the filter element should be replaced or cleaned in time. If the machine cannot be shut down immediately or no one comes to replace the filter element, the oil bypass valve on the upper part of the filter element will automatically open (the opening value is: vacuum 0.02MPa) to avoid air suction failure of the oil pump.

Application field

1. Filtration of petrochemical and oilfield pipelines; oil filtration of fuel oil equipment, construction machinery equipment and equipment filtration of water treatment industries;

2. Pharmaceutical and food processing fields;

3. It is suitable for pre-processing and post-processing systems in electronic, petroleum, chemical, pharmaceutical, food and other industrial sectors.

Product Details