The TF-160*180L-C oil suction filter is installed at the oil suction port of the oil pump to protect the oil pump and other hydraulic components to avoid inhaling polluted impurities, control the pollution of the hydraulic system, and improve the cleanliness of the hydraulic system.
The TF-160*180L-C oil suction filter is installed at the oil suction port of the oil pump to protect the oil pump and other hydraulic components to avoid inhaling polluted impurities, control the pollution of the hydraulic system, and improve the cleanliness of the hydraulic system.
Working medium: general hydraulic oil, phosphate ester hydraulic oil, emulsion, water-ethylene glycol
Flow: 45-70L/min
Filtration precision: 10-80μm
Working pressure: 0.6MPA
Connection method: thread
1. The TF-160*180L-C oil suction filter can be directly installed on the side, bottom or upper part of the oil tank, the filter head is exposed outside the oil tank, the oil suction cylinder is immersed below the liquid level in the oil tank, and the oil outlet is provided with a tubular type , Flange connection, self-sealing valve and other devices are set in the filter, so that the pipeline does not need to install other pipe fittings such as stop valve, so that the pipeline is simplified and the installation is convenient.
2. Set the self-sealing valve to make it convenient to replace, clean the filter element or maintain the system:
When replacing, cleaning the filter element or repairing the system, just unscrew the filter end cover (cleaning cover), at this time the self-sealing valve will automatically close, isolating the oil circuit of the oil tank, so that the oil in the oil tank will not flow out, so that the cleaning , It is most convenient to replace the filter element or maintain the system. For example, the self-sealing valve can be used to discharge the oil from the oil tank.
3. TF-160*180L-C oil suction filter has filter element pollution transmitter and oil bypass valve, which improves the reliability of hydraulic system:
TF-160*180L-C oil suction filter When the filter element is blocked by pollutants and the vacuum degree of the oil outlet is 0.018MPa, the transmitter will send a signal, and the filter element should be replaced or cleaned in time. If the machine cannot be shut down immediately or no one comes to replace the filter element, the oil bypass valve on the upper part of the filter element will automatically open (the opening value is: vacuum 0.02MPa) to avoid air suction failure of the oil pump. However, at this time, the filter should be stopped to replace or clean the filter element to maintain the cleanliness of the hydraulic system and improve the reliability of the hydraulic system.
1. In construction machinery, hydraulic transmission is widely used, such as excavators, tire loaders, truck cranes, crawler bulldozers, tire cranes, self-propelled scrapers, graders and vibratory rollers.
2. In agricultural machinery, hydraulic technology is also widely used, such as combine harvesters, tractors and plows.
3. In the automotive industry, hydraulic technology is used in hydraulic off-road vehicles, hydraulic dump trucks, hydraulic aerial work vehicles and fire trucks.
TF-160*180L-C oil suction filter
Similar ProductsVIEW MORE >