TF-160×L-Y/C oil suction filter

Product description

TF-160×L-Y/C oil suction filter is installed directly at the suction port of the oil pump to protect the oil pump and other hydraulic components. TF oil suction filter can avoid inhalation of polluted impurities, control the pollution of hydraulic system, and improve the cleanliness of hydraulic system. The filter can be directly installed on the side, top or bottom of the fuel tank. The oil suction cylinder is immersed below the liquid level in the fuel tank. This product has the advantages of novel design, convenient installation, large oil passing capacity, low resistance, and convenient cleaning or replacement of the filter element.

Performance characteristics

1. Easy installation and connection, simplifying the system pipeline:

The filter can be directly installed on the side, bottom or top of the oil tank. The filter head is exposed outside the oil tank, the oil suction cylinder is immersed below the liquid level in the oil tank, and the oil outlet is provided with pipe and flange connections. Set up self-sealing valve and other devices, so that the pipeline does not need to install other pipe fittings such as stop valve, so that the pipeline is simplified and the installation is convenient.

2. Set the self-sealing valve to make it convenient to replace, clean the filter element or maintain the system:

When replacing, cleaning the filter element or repairing the system, just unscrew the filter end cover (cleaning cover), at this time the self-sealing valve will automatically close, isolating the oil circuit of the oil tank, so that the oil in the oil tank will not flow out, so that the cleaning , It is convenient to replace the filter element or maintain the system. For example, the self-sealing valve can be used to discharge the oil from the oil tank.

3. It has filter element pollution transmitter and oil bypass valve, which improves the reliability of hydraulic system:

When the filter element is blocked by pollutants until the vacuum degree of the oil outlet is 0.018MPa, the transmitter will send a signal, and the filter element should be replaced or cleaned in time. If the machine cannot be shut down immediately or no one comes to replace the filter element, the oil bypass valve on the upper part of the filter element will automatically open (the opening value is: vacuum 0.02MPa) to avoid air suction failure of the oil pump. However, at this time, the filter should be stopped to replace or clean the filter element to maintain the cleanliness of the hydraulic system and improve the reliability of the hydraulic system.

Product Details